lzop - compress or expand files
is a file compressor very similar to gzip
speed over compression ratio.
] [ options
] [ -p
] [ filename
reduces the size of the named files. Whenever possible, each file is
compressed into one with the extension .lzo
, while keeping the same
ownership modes, access and modification times. If no files are specified, or
if a file name is "-", lzop tries to compress the standard input to
the standard output. lzop will only attempt to compress regular files or
symbolic links to regular files. In particular, it will ignore directories.
If the compressed file name is too long for its file system, lzop
Compressed files can be restored to their original form using
. lzop -d
takes a list of files on its
command line and decompresses each file whose name ends with .lzo
which begins with the correct magic number to an uncompressed file without the
original extension. lzop -d
also recognizes the special
as shorthand for .tar.lzo
. When compressing, lzop
uses the .tzo
extension if necessary instead of truncating a file with
stores the original file name, mode and time stamp in the compressed
file. These can be used when decompressing the file with the -d
This is useful when the compressed file name was truncated or when the time
stamp was not preserved after a file transfer.
preserves the ownership, mode and time stamp of files when
compressing. When decompressing lzop restores the mode and time stamp if
present in the compressed files. See the options -n
for more information.
always keeps original files unchanged unless you use the option
uses the LZO data compression library
services. The amount of compression obtained depends on the size of the input
and the distribution of common substrings. Typically, text such as source code
or English is compressed into 40-50% of the original size, and large files
usually compress much better than small ones. Compression and decompression
speed is generally much faster than that achieved by gzip
compression ratio is worse.
lzop offers the following compression levels of the LZO1X algorithm:
- the default level offers pretty fast compression. -2, -3,
-4, -5 and -6 are currently all equivalent - this may change in a future
- -1, --fast
- can be even a little bit faster in some cases - but most
times you won't notice the difference
- -7, -8, -9, --best
- these compression levels are mainly intended for generating
pre-compressed data - especially -9 can be somewhat slow
Decompression is very
fast for all compression levels, and decompression
speed is not affected by the compression level.
If no other command is given then lzop defaults to compression (using
compression level -3).
- -#, --fast, --best
- Regulate the speed of compression using the specified digit
#, where -1 or --fast indicates the fastest compression method
(less compression) and -9 or --best indicates the slowest compression
method (best compression). The default compression level is -3.
- -d, --decompress, --uncompress
- Decompress. Each file will be placed into same the
directory as the compressed file.
- -x, --extract
- Extract compressed files to the current working directory.
This is the same as '-dPp'.
- -t, --test
- Test. Check the compressed file integrity.
- -l, --list
- For each compressed file, list the following fields:
method: compression method
compressed: size of the compressed file
uncompr.: size of the uncompressed file
ratio: compression ratio
uncompressed_name: name of the uncompressed file
In combination with the --verbose option, the following fields are also
date & time: time stamp for the uncompressed file
With --name, the uncompressed name, date and time are those stored within
the compress file if present.
With --verbose, the size totals and compression ratio for all files is also
displayed. With --quiet, the title and totals lines are not displayed.
Note that lzop defines compression ratio as compressed_size /
- --ls, --ls=FLAGS
- List each compressed file in a format similar to
The following flags are currently honoured:
F Append a '*' for executable files.
G Inhibit display of group information.
Q Enclose file names in double quotes.
- For each compressed file, list the internal header
- -I, --sysinfo
- Display information about the system and quit.
- -L, --license
- Display the lzop license and quit.
- -h, -H, --help
- Display a help screen and quit.
- Version. Display the version number and compilation options
- Version. Display the version number and quit.
- -c, --stdout, --to-stdout
- Write output on standard output. If there are several input
files, the output consists of a sequence of independently (de)compressed
members. To obtain better compression, concatenate all input files before
- -o FILE, --output=FILE
- Write output to the file FILE. If there are several
input files, the output consists of a sequence of independently
- -p, -pDIR, --path=DIR
- Write output files into the directory DIR instead of
the directory determined by the input file. If DIR is omitted, then
write to the current working directory.
- -f, --force
- Force lzop to
- overwrite existing files
- (de-)compress from stdin even if it seems a terminal
- (de-)compress to stdout even if it seems a terminal
- allow option -c in combination with -U
Using -f two or more times forces things like
- compress files that already have a .lzo suffix
- try to decompress files that do not have a valid suffix
- try to handle compressed files with unknown header flags
Use with care.
- -F, --no-checksum
- Do not store or verify a checksum of the uncompressed file
when compressing or decompressing. This speeds up the operation of lzop a
little bit (especially when decompressing), but as unnoticed data
corruption can happen in case of damaged compressed files the usage of
this option is not generally recommended. Also, a checksum is always
stored when compressing with one of the slow compression levels (-7, -8 or
-9), regardless of this option.
- -n, --no-name
- When decompressing, do not restore the original file name
if present (remove only the lzop suffix from the compressed file name).
This option is the default under UNIX.
- -N, --name
- When decompressing, restore the original file name if
present. This option is useful on systems which have a limit on file name
length. If the original name saved in the compressed file is not suitable
for its file system, a new name is constructed from the original one to
make it legal. This option is the default under DOS, Windows and
- When decompressing, restore the original path and file name
if present. When compressing, store the relative (and cleaned) path name.
This option is mainly useful when using archive mode - see usage
- When decompressing, do not restore the original mode
(permissions) saved in the compressed file.
- When decompressing, do not restore the original time stamp
saved in the compressed file.
- -S .suf, --suffix=.suf
- Use suffix .suf instead of .lzo. The suffix
must not contain multiple dots and special characters like '+' or '*', and
suffixes other than .lzo should be avoided to avoid confusion when
files are transferred to other systems.
- -k, --keep
- Do not delete input files. This is the default.
- -U, --unlink, --delete
- Delete input files after successful compression or
decompression. Use this option to make lzop behave like gzip and
bzip2. Note that explicitly giving -k overrides
- Use a crc32 checksum instead of an adler32 checksum.
- Suppress all warnings.
- Suppress all warnings, and never exit with exit status
- -q, --quiet, --silent
- Suppress all warnings and decrease the verbosity of some
commands like --list or --test.
- -v, --verbose
- Verbose. Display the name for each file compressed or
decompressed. Multiple -v can be used to increase the verbosity of
some commands like --list or --test.
- Specifies that this is the end of the options. Any file
name after -- will not be interpreted as an option even if it
starts with a hyphen.
- Do not try to read standard input (but a file name
"-" will still override this option). In old versions of
lzop, this option was necessary when used in cron jobs (which do
not have a controlling terminal).
- Rarely useful. Preprocess data with a special
"multimedia" filter before compressing in order to improve
compression ratio. NUMBER must be a decimal number from 1 to 16,
inclusive. Using a filter slows down both compression and decompression
quite a bit, and the compression ratio usually doesn't improve much
either... More effective filters may be added in the future, though.
You can try --filter=1 with data like 8-bit sound samples, --filter=2 with
16-bit samples or depth-16 images, etc.
Un-filtering during decompression is handled automatically.
- -C, --checksum
- Deprecated. Only for compatibility with very old versions
as lzop now uses a checksum by default. This option will get removed in a
- Do not use any color escape sequences.
- Assume a mono ANSI terminal. This is the default under UNIX
(if console support is compiled in).
- Assume a color ANSI terminal or try full-screen access.
This is the default under DOS and in a Linux virtual console (if console
support is compiled in).
lzop allows you to deal with your files in many flexible ways. Here are some
- backup mode
tar --use-compress-program=lzop -cf archive.tar.lzo files..
This is the recommended mode for creating backups.
Requires GNU tar or a compatible version which accepts the
- single file mode: individually (de)compress each
lzop a.c -> create a.c.lzo
lzop a.c b.c -> create a.c.lzo & b.c.lzo
lzop -U a.c b.c -> create a.c.lzo & b.c.lzo and delete a.c & b.c
lzop -d a.c.lzo -> restore a.c
lzop -df a.c.lzo -> restore a.c, overwrite if already exists
lzop -d *.lzo
lzop -l a.c.lzo
lzop -l *.lzo
lzop -lv *.lzo -> be verbose
lzop -t a.c.lzo
lzop -tq *.lzo -> be quiet
- pipe mode: (de)compress from stdin to stdout
lzop < a.c > y.lzo
cat a.c | lzop > y.lzo
tar -cf - *.c | lzop > y.tar.lzo -> create a compressed tar file
lzop -d < y.lzo > a.c
lzop -d < y.tar.lzo | tar -xvf - -> extract a tar file
lzop -l < y.lzo
cat y.lzo | lzop -l
lzop -d < y.tar.lzo | tar -tvf - -> list a tar file
lzop -t < y.lzo
cat y.lzo | lzop -t
- stdout mode: (de)compress to stdout
lzop -c a.c > y.lzo
lzop -dc y.lzo > a.c
lzop -dc y.tar.lzo | tar -xvf - -> extract a tar file
lzop -dc y.tar.lzo | tar -tvf - -> list a tar file
- archive mode: compress/extract multiple files into a
single archive file
lzop a.c b.c -o sources.lzo -> create an archive
lzop -P src/*.c -o sources.lzo -> create an archive, store path name
lzop -c *.c > sources.lzo -> another way to create an archive
lzop -c *.h >> sources.lzo -> add files to archive
lzop -dN sources.lzo
lzop -x ../src/sources.lzo -> extract to current directory
lzop -x -p/tmp < ../src/sources.lzo -> extract to /tmp directory
lzop -lNv sources.lzo
lzop -t sources.lzo
lzop -tvv sources.lzo -> be very verbose
If you wish to create a single archive file with multiple members so that
members can later be extracted independently, you should prefer a
full-featured archiver such as tar. The latest version of GNU tar supports the
option to invoke lzop transparently. lzop
is designed as a complement to tar, not as a replacement.
The environment variable LZOP
can hold a set of default options for lzop.
These options are interpreted first and can be overwritten by explicit command
line parameters. For example:
for sh/ksh/zsh: LZOP="-1v --name"; export LZOP
for csh/tcsh: setenv LZOP "-1v --name"
for DOS/Windows: set LZOP=-1v --name
On Vax/VMS, the name of the environment variable is LZOP_OPT, to avoid a
conflict with the symbol set for invocation of the program.
Not all of the options are valid in the environment variable - lzop will tell
Precompiled binaries for some platforms are available from the lzop home page.
lzop uses the LZO data compression library for compression services.
Exit status is normally 0; if an error occurs, exit status is 1. If a warning
occurs, exit status is 2 (unless option --ignore-warn
is in effect).
diagnostics are intended to be self-explanatory.
No bugs are known. Please report all problems immediately to the author.
Markus Franz Xaver Johannes Oberhumer <email@example.com>
lzop and the LZO library are Copyright (C) 1996-2017 Markus Franz Xaver
Oberhumer <firstname.lastname@example.org>. All Rights Reserved.
lzop and the LZO library are distributed under the terms of the GNU General
Public License (GPL).
Legal info: If want to integrate lzop into your commercial (backup-)system
please carefully read the GNU GPL FAQ at
http://www.gnu.org/licenses/gpl-faq.html about possible implications.