systemd-analyze [OPTIONS...] [time]
systemd-analyze [OPTIONS...] blame
systemd-analyze [OPTIONS...] critical-chain [UNIT...]
systemd-analyze [OPTIONS...] plot [> file.svg]
systemd-analyze [OPTIONS...] dot [PATTERN...] [> file.dot]
systemd-analyze [OPTIONS...] dump
systemd-analyze [OPTIONS...] cat-config NAME|PATH...
systemd-analyze [OPTIONS...] unit-paths
systemd-analyze [OPTIONS...] log-level [LEVEL]
systemd-analyze [OPTIONS...] log-target [TARGET]
systemd-analyze [OPTIONS...] syscall-filter [SET...]
systemd-analyze [OPTIONS...] verify [FILES...]
systemd-analyze [OPTIONS...] calendar SPECS...
systemd-analyze [OPTIONS...] service-watchdogs [BOOL]
systemd-analyze [OPTIONS...] timespan SPAN...
systemd-analyze [OPTIONS...] security UNIT...
systemd-analyze time prints the time spent in the kernel before userspace has been reached, the time spent in the initial RAM disk (initrd) before normal system userspace has been reached, and the time normal system userspace took to initialize. Note that these measurements simply measure the time passed up to the point where all system services have been spawned, but not necessarily until they fully finished initialization or the disk is idle.
systemd-analyze blame prints a list of all running units, ordered by the time they took to initialize. This information may be used to optimize boot-up times. Note that the output might be misleading as the initialization of one service might be slow simply because it waits for the initialization of another service to complete. Also note: systemd-analyze blame doesn't display results for services with Type=simple, because systemd considers such services to be started immediately, hence no measurement of the initialization delays can be done.
systemd-analyze critical-chain [UNIT...] prints a tree of the time-critical chain of units (for each of the specified UNITs or for the default target otherwise). The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character. Note that the output might be misleading as the initialization of one service might depend on socket activation and because of the parallel execution of units.
systemd-analyze plot prints an SVG graphic detailing which system services have been started at what time, highlighting the time they spent on initialization.
systemd-analyze dot generates textual dependency graph description in dot format for further processing with the GraphViz dot(1) tool. Use a command line like systemd-analyze dot | dot -Tsvg > systemd.svg to generate a graphical dependency tree. Unless --order or --require is passed, the generated graph will show both ordering and requirement dependencies. Optional pattern globbing style specifications (e.g. *.target) may be given at the end. A unit dependency is included in the graph if any of these patterns match either the origin or destination node.
systemd-analyze dump outputs a (usually very long) human-readable serialization of the complete server state. Its format is subject to change without notice and should not be parsed by applications.
systemd-analyze cat-config is similar to systemctl cat, but operates on config files. It will copy the contents of a config file and any drop-ins to standard output, using the usual systemd set of directories and rules for precedence. Each argument must be either an absolute path including the prefix (such as /etc/systemd/logind.conf or /usr/lib/systemd/logind.conf), or a name relative to the prefix (such as systemd/logind.conf).
Example 1. Showing logind configuration
$ systemd-analyze cat-config systemd/logind.conf # /etc/systemd/logind.conf ... [Login] NAutoVTs=8 ... # /usr/lib/systemd/logind.conf.d/20-test.conf ... some override from another package # /etc/systemd/logind.conf.d/50-override.conf ... some administrator override
systemd-analyze unit-paths outputs a list of all directories from which unit files, .d overrides, and .wants, .requires symlinks may be loaded. Combine with --user to retrieve the list for the user manager instance, and --global for the global configuration of user manager instances. Note that this verb prints the list that is compiled into systemd-analyze itself, and does not comunicate with the running manager. Use
systemctl [--user] [--global] show -p UnitPath --value
to retrieve the actual list that the manager uses, with any empty directories omitted.
systemd-analyze log-level prints the current log level of the systemd daemon. If an optional argument LEVEL is provided, then the command changes the current log level of the systemd daemon to LEVEL (accepts the same values as --log-level= described in systemd(1)).
systemd-analyze log-target prints the current log target of the systemd daemon. If an optional argument TARGET is provided, then the command changes the current log target of the systemd daemon to TARGET (accepts the same values as --log-target=, described in systemd(1)).
systemd-analyze syscall-filter [SET...] will list system calls contained in the specified system call set SET, or all known sets if no sets are specified. Argument SET must include the "@" prefix.
systemd-analyze verify will load unit files and print warnings if any errors are detected. Files specified on the command line will be loaded, but also any other units referenced by them. The full unit search path is formed by combining the directories for all command line arguments, and the usual unit load paths (variable $SYSTEMD_UNIT_PATH is supported, and may be used to replace or augment the compiled in set of unit load paths; see systemd.unit(5)). All units files present in the directories containing the command line arguments will be used in preference to the other paths.
systemd-analyze calendar will parse and normalize repetitive calendar time events, and will calculate when they will elapse next. This takes the same input as the OnCalendar= setting in systemd.timer(5), following the syntax described in systemd.time(7).
systemd-analyze service-watchdogs prints the current state of service runtime watchdogs of the systemd daemon. If an optional boolean argument is provided, then globally enables or disables the service runtime watchdogs (WatchdogSec=) and emergency actions (e.g. OnFailure= or StartLimitAction=); see systemd.service(5). The hardware watchdog is not affected by this setting.
systemd-analyze timespan parses a time span and outputs the equivalent value in microseconds, and as a reformatted timespan. The time span should adhere to the same syntax documented in systemd.time(7). Values without associated magnitudes are parsed as seconds.
systemd-analyze security analyzes the security and sandboxing settings of one or more specified service units. If at least one unit name is specified the security settings of the specified service units are inspected and a detailed analysis is shown. If no unit name is specified, all currently loaded, long-running service units are inspected and a terse table with results shown. The command checks for various security-related service settings, assigning each a numeric "exposure level" value, depending on how important a setting is. It then calculates an overall exposure level for the whole unit, which is an estimation in the range 0.0...10.0 indicating how exposed a service is security-wise. High exposure levels indicate very little applied sandboxing. Low exposure levels indicate tight sandboxing and strongest security restrictions. Note that this only analyzes the per-service security features systemd itself implements. This means that any additional security mechanisms applied by the service code itself are not accounted for. The exposure level determined this way should not be misunderstood: a high exposure level neither means that there is no effective sandboxing applied by the service code itself, nor that the service is actually vulnerable to remote or local attacks. High exposure levels do indicate however that most likely the service might benefit from additional settings applied to them. Please note that many of the security and sandboxing settings individually can be circumvented — unless combined with others. For example, if a service retains the privilege to establish or undo mount points many of the sandboxing options can be undone by the service code itself. Due to that is essential that each service uses the most comprehensive and strict sandboxing and security settings possible. The tool will take into account some of these combinations and relationships between the settings, but not all. Also note that the security and sandboxing settings analyzed here only apply to the operations executed by the service code itself. If a service has access to an IPC system (such as D-Bus) it might request operations from other services that are not subject to the same restrictions. Any comprehensive security and sandboxing analysis is hence incomplete if the IPC access policy is not validated too.
If no command is passed, systemd-analyze time is implied.
Each of these can be used more than once, in which case the unit name must match one of the values. When tests for both sides of the relation are present, a relation must pass both tests to be shown. When patterns are also specified as positional arguments, they must match at least one side of the relation. In other words, patterns specified with those two options will trim the list of edges matched by the positional arguments, if any are given, and fully determine the list of edges shown otherwise.
$ systemd-analyze dot 'avahi-daemon.*' | dot -Tsvg > avahi.svg $ eog avahi.svg
Example 3. Plots the dependencies between all known target units
$ systemd-analyze dot --to-pattern='*.target' --from-pattern='*.target' | dot -Tsvg > targets.svg $ eog targets.svg
Example 4. Misspelt directives
$ cat ./user.slice [Unit] WhatIsThis=11 Documentation=man:nosuchfile(1) Requires=different.service [Service] Description=x $ systemd-analyze verify ./user.slice [./user.slice:9] Unknown lvalue 'WhatIsThis' in section 'Unit' [./user.slice:13] Unknown section 'Service'. Ignoring. Error: org.freedesktop.systemd1.LoadFailed: Unit different.service failed to load: No such file or directory. Failed to create user.slice/start: Invalid argument user.slice: man nosuchfile(1) command failed with code 16
Example 5. Missing service units
$ tail ./a.socket ./b.socket ==> ./a.socket <== [Socket] ListenStream=100 ==> ./b.socket <== [Socket] ListenStream=100 Accept=yes $ systemd-analyze verify ./a.socket ./b.socket Service a.service not loaded, a.socket cannot be started. Service email@example.com not loaded, b.socket cannot be started.
If the value of $SYSTEMD_LESS does not include "K", and the pager that is invoked is less, Ctrl+C will be ignored by the executable. This allows less to handle Ctrl+C itself.